The Architecture of Open Source Applications The Architecture of
Open Source Applications

Amy Brown and Greg Wilson (eds.)
ISBN 978-1-257-63801-7
License / Buy / News / Contribute / FAQ

Chapter 20. Telepathy

Danielle Madeley

Telepathy1 is a modular framework for real-time communications that handles voice, video, text, file transfer, and so on. What's unique about Telepathy is not that it abstracts the details of various instant messaging protocols, but that it provides the idea of communications as a service, in much the same way that printing is a service, available to many applications at once. To achieve this Telepathy makes extensive use of the D-Bus messaging bus and a modular design.

Communications as a service is incredibly useful, because it allows us to break communications out of a single application. This enables lots of interesting use cases: being able to see a contact's presence in your email application; start communicating with her; launching a file transfer to a contact straight from your file browser; or providing contact-to-contact collaboration within applications, known in Telepathy as Tubes.

Telepathy was created by Robert McQueen in 2005 and since that time has been developed and maintained by several companies and individual contributors including Collabora, the company co-founded by McQueen.

The D-Bus Message Bus

D-Bus is an asynchronous message bus for interprocess communication that forms the backbone of most GNU/Linux systems including the GNOME and KDE desktop environments. D-Bus is a primarily a shared bus architecture: applications connect to a bus (identified by a socket address) and can either transmit a targeted message to another application on the bus, or broadcast a signal to all bus members. Applications on the bus have a bus address, similar to an IP address, and can claim a number of well-known names, like DNS names, for example org.freedesktop.Telepathy.AccountManager. All processes communicate via the D-Bus daemon, which handles message passing, and name registration.

From the user's perspective, there are two buses available on every system. The system bus is a bus that allows the user to communicate with system-wide components (printers, bluetooth, hardware management, etc.) and is shared by all users on the system. The session bus is unique to that user—i.e., there is a session bus per logged-in user—and is used for the user's applications to communicate with each other. When a lot of traffic is to be transmitted over the bus, it's also possible for applications to create their own private bus, or to create a peer-to-peer, unarbitrated bus with no dbus-daemon.

Several libraries implement the D-Bus protocol and can communicate with the D-Bus daemon, including libdbus, GDBus, QtDBus, and python-dbus. These libraries are responsible for sending and receiving D-Bus messages, marshalling types from the language's type system into D-Bus' type format and publishing objects on the bus. Usually, the libraries also provide convenience APIs for listing connected applications and activatable applications, and requesting well-known names on the bus. At the D-Bus level, all of these are done by making method calls on an object published by dbus-daemon itself.

For more information on D-Bus, see

20.1. Components of the Telepathy Framework

Telepathy is modular, with each module communicating with the others via a D-Bus messaging bus. Most usually via the user's session bus. This communication is detailed in the Telepathy specification2. The components of the Telepathy framework are as shown in Figure 20.1:

Within the current implementation of Telepathy, the Account Manager and the Channel Dispatcher are both provided by a single process known as Mission Control.

[Example Telepathy Components]

Figure 20.1: Example Telepathy Components

This modular design was based on Doug McIlroy's philosophy, "Write programs that do one thing and do it well," and has several important advantages:

The Connection Manager manages a number of Connections, where each Connection represents a logical connection to a communications service. There is one Connection per configured account. A Connection will contain multiple Channels. Channels are the mechanism through which communications are carried out. A channel might be an IM conversation, voice or video call, file transfer or some other stateful operation. Connections and channels are discussed in detail in Section 20.3.

20.2. How Telepathy uses D-Bus

Telepathy components communicate via a D-Bus messaging bus, which is usually the user's session bus. D-Bus provides features common to many IPC systems: each service publishes objects which have a strictly namespaced object path, like /org/freedesktop/Telepathy/AccountManager3. Each object implements a number of interfaces. Again strictly namespaced, these have forms like org.freedesktop.DBus.Properties and ofdT.Connection. Each interface provides methods, signals and properties that you can call, listen to, or request.

[Conceptual Representation of Objects Published by a D-Bus Service]

Figure 20.2: Conceptual Representation of Objects Published by a D-Bus Service

Publishing D-Bus Objects

Publishing D-Bus objects is handled entirely by the D-Bus library being used. In effect it is a mapping from a D-Bus object path to the software object implementing those interfaces. The paths of objects being published by a service are exposed by the optional org.freedesktop.DBus.Introspectable interface.

When a service receives an incoming method call with a given destination path (e.g., /ofdT/AccountManager), the D-Bus library is responsible for locating the software object providing that D-Bus object and then making the appropriate method call on that object.

The interfaces, methods, signal and properties provided by Telepathy are detailed in an XML-based D-Bus IDL that has been expanded to include more information. The specification can be parsed to generate documentation and language bindings.

Telepathy services publish a number of objects onto the bus. Mission Control publishes objects for the Account Manager and Channel Dispatcher so that their services can be accessed. Clients publish a Client object that can be accessed by the Channel Dispatcher. Finally, Connection Managers publish a number of objects: a service object that can be used by the Account Manager to request new connections, an object per open connection, and an object per open channel.

Although D-Bus objects do not have a type (only interfaces), Telepathy simulates types several ways. The object's path tells us whether the object is a connection, channel, client, and so on, though generally you already know this when you request a proxy to it. Each object implements the base interface for that type, e.g., ofdT.Connection or ofdT.Channel. For channels this is sort of like an abstract base class. Channel objects then have a concrete class defining their channel type. Again, this is represented by a D-Bus interface. The channel type can be learned by reading the ChannelType property on the Channel interface.

Finally, each object implements a number of optional interfaces (unsurprisingly also represented as D-Bus interfaces), which depend on the capabilities of the protocol and the Connection Manager. The interfaces available on a given object are available via the Interfaces property on the object's base class.

For Connection objects of type ofdT.Connection, the optional interfaces have names like ofdT.Connection.Interface.Avatars (if the protocol has a concept of avatars), odfT.Connection.Interface.ContactList (if the protocol provides a contact roster—not all do) and odfT.Connection.Interface.Location (if a protocol provides geolocation information). For Channel objects, of type ofdT.Channel, the concrete classes have interface names of the form ofdT.Channel.Type.Text, odfT.Channel.Type.Call and odfT.Channel.Type.FileTransfer. Like Connections, optional interface have names likes odfT.Channel.Interface.Messages (if this channel can send and receive text messages) and odfT.Channel.Interface.Group (if this channel is to a group containing multiple contacts, e.g., a multi-user chat). So, for example, a text channel implements at least the ofdT.Channel, ofdT.Channel.Type.Text and Channel.Interface.Messages interfaces. If it's a multi-user chat, it will also implement odfT.Channel.Interface.Group.

Why an Interfaces Property and not D-Bus Introspection?

You might wonder why each base class implements an Interfaces property, instead of relying on D-Bus' introspection capabilities to tell us what interfaces are available. The answer is that different channel and connection objects may offer different interfaces to each other, depending on the capabilities of the channel or connection, but that most of the implementations of D-Bus introspection assume that all objects of the same object class will have the same interfaces. For example, in telepathy-glib, the D-Bus interfaces listed by D-Bus introspection are retrieved from the object interfaces a class implements, which is statically defined at compile time. We work around this by having D-Bus introspection provide data for all the interfaces that could exist on an object, and use the Interfaces property to indicate which ones actually do.

Although D-Bus itself provides no sanity checking that connection objects only have connection-related interfaces and so forth (since D-Bus has no concept of types, only arbitrarily named interfaces), we can use the information contained within the Telepathy specification to provide sanity checking within the Telepathy language bindings.

Why and How the Specification IDL was Expanded

The existing D-Bus specification IDL defines the names, arguments, access restrictions and D-Bus type signatures of methods, properties and signals. It provides no support for documentation, binding hints or named types.

To resolve these limitations, a new XML namespace was added to provide the required information. This namespace was designed to be generic so that it could be used by other D-Bus APIs. New elements were added to include inline documentation, rationales, introduction and deprecation versions and potential exceptions from methods.

D-Bus type signatures are the low-level type notation of what is serialized over the bus. A D-Bus type signature may look like (ii) (which is a structure containing two int32s), or it may be more complex. For example, a{sa(usuu)}, is a map from string to an array of structures containing uint32, string, uint32, uint32 (Figure 20.3). These types, while descriptive of the data format, provide no semantic meaning to the information contained in the type.

In an effort to provide semantic clarity for programmers and strengthen the typing for language bindings, new elements were added to name simple types, structs, maps, enums, and flags, providing their type signature, as well as documentation. Elements were also added in order to simulate object inheritance for D-Bus objects.

[D-Bus Types (ii) and a{sa(usuu)}]

Figure 20.3: D-Bus Types (ii) and a{sa(usuu)}

20.2.1. Handles

Handles are used in Telepathy to represent identifiers (e.g., contacts and room names). They are an unsigned integer value assigned by the connection manager, such that the tuple (connection, handle type, handle) uniquely refers to a given contact or room.

Because different communications protocols normalize identifiers in different ways (e.g., case sensitivity, resources), handles provide a way for clients to determine if two identifiers are the same. They can request the handle for two different identifiers, and if the handle numbers match, then the identifiers refer to the same contact or room.

Identifier normalization rules are different for each protocol, so it is a mistake for clients to compare identifier strings to compare identifiers. For example, and are two instances of the same contact ( in the XMPP protocol, and therefore have the same handle. It is possible for clients to request channels by either identifier or handle, but they should only ever use handles for comparison.

20.2.2. Discovering Telepathy Services

Some services, such as the Account Manager and the Channel Dispatcher, which always exist, have well known names that are defined in the Telepathy specification. However, the names of Connection Managers and clients are not well-known, and must be discovered.

There's no service in Telepathy responsible for the registration of running Connection Managers and Clients. Instead, interested parties listen on the D-Bus for the announcement of a new service. The D-Bus bus daemon will emit a signal whenever a new named D-Bus service appears on the bus. The names of Clients and Connection Managers begin with known prefixes, defined by the specification, and new names can be matched against these.

The advantage of this design is that it's completely stateless. When a Telepathy component is starting up, it can ask the bus daemon (which has a canonical list, based on its open connections) what services are currently running. For instance, if the Account Manager crashes, it can look to see what connections are running, and reassociate those with its account objects.

Connections are Services Too

As well as the Connection Managers themselves, the connections are also advertised as D-Bus services. This hypothetically allows for the Connection Manager to fork each connection off as a separate process, but to date no Connection Manager like this has been implemented. More practically, it allows all running connections to be discovered by querying the D-Bus bus daemon for all services beginning with ofdT.Connection.

The Channel Dispatcher also uses this method to discover Telepathy clients. These begin with the name ofdT.Client, e.g., ofdT.Client.Logger.

20.2.3. Reducing D-Bus Traffic

Original versions of the Telepathy specification created an excessive amount of D-Bus traffic in the form of method calls requesting information desired by lots of consumers on the bus. Later versions of the Telepathy have addressed this through a number of optimizations.

Individual method calls were replaced by D-Bus properties. The original specification included separate method calls for object properties: GetInterfaces, GetChannelType, etc. Requesting all the properties of an object required several method calls, each with its own calling overhead. By using D-Bus properties, everything can be requested at once using the standard GetAll method.

Furthermore, quite a number of properties on a channel are immutable for the lifetime of the channel. These include things like the channel's type, interfaces, who it's connected to and the requestor. For a file transfer channel, for example, it also includes things like the file size and its content type.

A new signal was added to herald the creation of channels (both incoming and in response to outgoing requests) that includes a hash table of the immutable properties. This can be passed directly to the channel proxy constructor (see Section 20.4), which saves interested clients from having to request this information individually.

User avatars are transmitted across the bus as byte arrays. Although Telepathy already used tokens to refer to avatars, allowing clients to know when they needed a new avatar and to save downloading unrequired avatars, each client had to individually request the avatar via a RequestAvatar method that returned the avatar as its reply. Thus, when the Connection Manager signalled that a contact had updated its avatar, several individual requests for the avatar would be made, requiring the avatar to be transmitted over the message bus several times.

This was resolved by adding a new method which did not return the avatar (it returns nothing). Instead, it placed the avatar in a request queue. Retrieving the avatar from the network would result in a signal, AvatarRetrieved, that all interested clients could listen to. This means the avatar data only needs to be transmitted over the bus once, and will be available to all the interested clients. Once the client's request was in the queue, all further client requests can be ignored until the emission of the AvatarRetrieved.

Whenever a large number of contacts need to be loaded (i.e., when loading the contact roster), a significant amount of information needs to be requested: their aliases, avatars, capabilities, and group memberships, and possibly their location, address, and telephone numbers. Previously in Telepathy this would require one method call per information group (most API calls, such as GetAliases already took a list of contacts), resulting in half a dozen or more method calls.

To solve this, the Contacts interface was introduced. It allowed information from multiple interfaces to be returned via a single method call. The Telepathy specification was expanded to include Contact Attributes: namespaced properties returned by the GetContactAttributes method that shadowed method calls used to retrieve contact information. A client calls GetContactAttributes with a list of contacts and interfaces it is interested in, and gets back a map from contacts to a map of contact attributes to values.

A bit of code will make this clearer. The request looks like this:

  [ 1, 2, 3 ], # contact handles
  [ "ofdT.Connection.Interface.Aliasing",
  False # don't hold a reference to these contacts

and the reply might look like this:

{ 1: { 'ofdT.Connection.Interface.Aliasing/alias': 'Harvey Cat',
       'ofdT.Connection.Interface.Avatars/token': hex string,
       'ofdT.Connection.Interface.Location/location': location,
       'ofdT.Connection.Interface.ContactGroups/groups': [ 'Squid House' ],
       'ofdT.Connection/contact-id': ''
  2: { 'ofdT.Connection.Interface.Aliasing/alias': 'Escher Cat',
       'ofdT.Connection.Interface.Avatars/token': hex string,
       'ofdT.Connection.Interface.Location/location': location,
       'ofdT.Connection.Interface.ContactGroups/groups': [],
       'ofdT.Connection/contact-id': ''
  3: { 'ofdT.Connection.Interface.Aliasing/alias': 'Cami Cat',
        ⋮    ⋮    ⋮

20.3. Connections, Channels and Clients

20.3.1. Connections

A Connection is created by the Connection Manager to establish a connection to a single protocol/account. For example, connecting to the XMPP accounts and would result in two Connections, each represented by a D-Bus object. Connections are typically set up by the Account Manager, for the currently enabled accounts.

The Connection provides some mandatory functionality for managing and monitoring the connection status and for requesting channels. It can then also provide a number of optional features, depending on the features of the protocol. These are provided as optional D-Bus interfaces (as discussed in the previous section) and listed by the Connection's Interfaces property.

Typically Connections are managed by the Account Manager, created using the properties of the respective accounts. The Account Manager will also synchronize the user's presence for each account to its respective connection and can be asked to provide the connection path for a given account.

20.3.2. Channels

Channels are the mechanism through which communications are carried out. A channel is typically an IM conversation, voice or video call or file transfer, but channels are also used to provide some stateful communication with the server itself, (e.g., to search for chat rooms or contacts). Each channel is represented by a D-Bus object.

Channels are typically between two or more users, one of whom is yourself. They typically have a target identifier, which is either another contact, in the case of one-to-one communication; or a room identifier, in the case of multi-user communication (e.g., a chat room). Multi-user channels expose the Group interface, which lets you track the contacts who are currently in the channel.

Channels belong to a Connection, and are requested from the Connection Manager, usually via the Channel Dispatcher; or they are created by the Connection in response to a network event (e.g., incoming chat), and handed to the Channel Dispatcher for dispatching.

The type of channel is defined by the channel's ChannelType property. The core features, methods, properties, and signals that are needed for this channel type (e.g., sending and receiving text messages) are defined in the appropriate Channel.Type D-Bus interface, for instance Channel.Type.Text. Some channel types may implement optional additional features (e.g., encryption) which appear as additional interfaces listed by the channel's Interfaces property. An example text channel that connects the user to a multi-user chatroom might have the interfaces shown in Table 20.1.

Property Purpose
odfT.Channel Features common to all channels
odfT.Channel.Type.Text The Channel Type, includes features common to text channels
odfT.Channel.Interface.Messages Rich-text messaging
odfT.Channel.Interface.Group List, track, invite and approve members in this channel
odfT.Channel.Interface.Room Read and set properties such as the chatroom's subject

Table 20.1: Example Text Channel

Contact List Channels: A Mistake

In the first versions of the Telepathy specification, contact lists were considered a type of channel. There were several server-defined contact lists (subscribed users, publish-to users, blocked users), that could be requested from each Connection. The members of the list were then discovered using the Group interface, like for a multi-user chat.

Originally this would allow for channel creation to occur only once the contact list had been retrieved, which takes time on some protocols. A client could request the channel whenever it liked, and it would be delivered once ready, but for users with lots of contacts this meant the request would occasionally time out. Determining the subscription/publish/blocked status of a client required checking three channels.

Contact Groups (e.g., Friends) were also exposed as channels, one channel per group. This proved extremely difficult for client developers to work with. Operations like getting the list of groups a contact was in required a significant amount of code in the client. Further, with the information only available via channels, properties such as a contact's groups or subscription state could not be published via the Contacts interface.

Both channel types have since been replaced by interfaces on the Connection itself which expose contact roster information in ways more useful to client authors, including subscription state of a contact (an enum), groups a contact is in, and contacts in a group. A signal indicates when the contact list has been prepared.

20.3.3. Requesting Channels, Channel Properties and Dispatching

Channels are requested using a map of properties you wish the desired channel to possess. Typically, the channel request will include the channel type, target handle type (contact or room) and target. However, a channel request may also include properties such as the filename and filesize for file transfers, whether to initially include audio and video for calls, what existing channels to combine into a conference call, or which contact server to conduct a contact search on.

The properties in the channel request are properties defined by interfaces of the Telepathy spec, such as the ChannelType property (Table 20.2). They are qualified with the namespace of the interface they come from Properties which can be included in channel requests are marked as requestable in the Telepathy spec.

Property Value
ofdT.Channel.ChannelType ofdT.Channel.Type.Text
ofdT.Channel.TargetHandleType Handle_Type_Contact (1)

Table 20.2: Example Channel Requests

The more complicated example in Table 20.3 requests a file transfer channel. Notice how the requested properties are qualified by the interface from which they come. (For brevity, not all required properties are shown.)

Property Value
ofdT.Channel.ChannelType ofdT.Channel.Type.FileTransfer
ofdT.Channel.TargetHandleType Handle_Type_Contact (1)
ofdT.Channel.Type.FileTransfer.Filename meow.jpg
ofdT.Channel.Type.FileTransfer.ContentType image/jpeg

Table 20.3: File Transfer Channel Request

Channels can either be created or ensured. Ensuring a channel means creating it only if it does not already exist. Asking to create a channel will either result in a completely new and separate channel being created, or in an error being generated if multiple copies of such a channel cannot exist. Typically you wish to ensure text channels and calls (i.e., you only need one conversation open with a person, and in fact many protocols do not support multiple separate conversations with the same contact), and wish to create file transfers and stateful channels.

Newly created channels (requested or otherwise) are announced by a signal from the Connection. This signal includes a map of the channel's immutable properties. These are the properties which are guaranteed not to change throughout the channel's lifetime. Properties which are considered immutable are marked as such in the Telepathy spec, but typically include the channel's type, target handle type, target, initiator (who created the channel) and interfaces. Properties such as the channel's state are obviously not included.

Old-School Channel Requesting

Channels were originally requested simply by type, handle type and target handle. This wasn't sufficiently flexible because not all channels have a target (e.g., contact search channels), and some channels require additional information included in the initial channel request (e.g., file transfers, requesting voicemails and channels for sending SMSes).

It was also discovered that two different behaviors might be desired when a channel was requested (either to create a guaranteed unique channel, or simply ensure a channel existed), and until this time the Connection had been responsible for deciding which behavior would occur. Hence, the old method was replaced by the newer, more flexible, more explicit ones.

Returning a channel's immutable properties when you create or ensure the channel makes it much faster to create a proxy object for the channel. This is information we now don't have to request. The map in Table 20.4 shows the immutable properties that might be included when we request a text channel (i.e., using the channel request in Table 20.3). Some properties (including TargetHandle and InitiatorHandle) have been excluded for brevity.

Property Value
ofdT.Channel.ChannelType Channel.Type.Text
ofdT.Channel.Interfaces {[} Channel.Interface.Messages, Channel.Interface.Destroyable, Channel.Interface.ChatState {]}
ofdT.Channel.TargetHandleType Handle_Type_Contact (1)
ofdT.Channel.Requested True
ofdT.Channel.Interface.Messages.SupportedContentTypes {[} text/html, text/plain {]}

Table 20.4: Example Immutable Properties Returned by a New Channel

The requesting program typically makes a request for a channel to the Channel Dispatcher, providing the account the request is for, the channel request, and optionally the name of a the desired handler (useful if the program wishes to handle the channel itself). Passing the name of an account instead of a connection means that the Channel Dispatcher can ask the Account Manager to bring an account online if required.

Once the request is complete, the Channel Dispatcher will either pass the channel to the named Handler, or locate an appropriate Handler (see below for discussion on Handlers and other clients). Making the name of the desired Handler optional makes it possible for programs that have no interest in communication channels beyond the initial request to request channels and have them handled by the best program available (e.g., launching a text chat from your email client).

[Channel Request and Dispatching]

Figure 20.4: Channel Request and Dispatching

The requesting program makes a channel request to the Channel Dispatcher, which in turn forwards the request to the appropriate Connection. The Connection emits the NewChannels signal which is picked up by the Channel Dispatcher, which then finds the appropriate client to handle the channel. Incoming, unrequested channels are dispatched in much the same way, with a signal from the Connection that is picked up by the Channel Dispatcher, but obviously without the initial request from a program.

20.3.4. Clients

Clients handle or observe incoming and outgoing communications channels. A client is anything that is registered with the Channel Dispatcher. There are three types of clients (though a single client may be two, or all three, types if the developer wishes):

Clients offer D-Bus services with up to three interfaces: Client.Observer, Client.Approver, and Client.Handler. Each interface provides a method that the Channel Dispatcher can call to inform the client about a channel to observe, approve or handle.

The Channel Dispatcher dispatches the channel to each group of clients in turn. First, the channel is dispatched to all appropriate Observers. Once they have all returned, the channel is dispatched to all the appropriate Approvers. Once the first Approver has approved or rejected the channel, all other Approvers are informed and the channel is finally dispatched to the Handler. Channel dispatching is done in stages because Observers might need time to get set up before the Handler begins altering the channel.

Clients expose a channel filter property which is a list of filters read by the Channel Dispatcher so that it knows what sorts of channels a client is interested in. A filter must include at least the channel type, and target handle type (e.g., contact or room) that the client is interested in, but it can contain more properties. Matching is done against the channel's immutable properties, using simple equality for comparison. The filter in Table 20.5 matches all one-to-one text channels.

Property Value
ofdT.Channel.ChannelType Channel.Type.Text
ofdT.Channel.TargetHandleType Handle_Type_Contact (1)

Table 20.5: Example Channel Filter

Clients are discoverable via D-Bus because they publish services beginning with the well-known name ofdT.Client (for example ofdT.Client.Empathy.Chat). They can also optionally install a file which the Channel Dispatcher will read specifying the channel filters. This allows the Channel Dispatcher to start a client if it is not already running. Having clients be discoverable in this way makes the choice of user interface configurable and changeable at any time without having to replace any other part of Telepathy.

All or Nothing

It is possible to provide a filter indicating you are interested in all channels, but in practice this is only useful as an example of observing channels. Real clients contain code that is specific to channel types.

An empty filter indicates a Handler is not interested in any channel types. However it is still possible to dispatch a channel to this handler if you do so by name. Temporary Handlers which are created on demand to handle a specific channel use such a filter.

20.4. The Role of Language Bindings

As Telepathy is a D-Bus API, and thus can driven by any programming language that supports D-Bus. Language bindings are not required for Telepathy, but they can be used to provide a convenient way to use it.

Language bindings can be split into two groups: low-level bindings that include code generated from the specification, constants, method names, etc.; and high-level bindings, which are hand-written code that makes it easier for programmers to do things using Telepathy. Examples of high-level bindings are the GLib and Qt4 bindings. Examples of low-level bindings are the Python bindings and the original libtelepathy C bindings, though the GLib and Qt4 bindings include a low-level binding.

20.4.1. Asynchronous Programming

Within the language bindings, all method calls that make requests over D-Bus are asynchronous: the request is made, and the reply is given in a callback. This is required because D-Bus itself is asynchronous.

Like most network and user interface programming, D-Bus requires the use of an event loop to dispatch callbacks for incoming signals and method returns. D-Bus integrates well with the GLib mainloop used by the GTK+ and Qt toolkits.

Some D-Bus language bindings (such as dbus-glib) provide a pseudo-synchronous API, where the main loop is blocked until the method reply is returned. Once upon a time this was exposed via the telepathy-glib API bindings. Unfortunately using pseudo-synchronous API turns out to be fraught with problems, and was eventually removed from telepathy-glib.

Why Pseudo-Synchronous D-Bus Calls Don't Work

The pseudo-synchronous interface offered by dbus-glib and other D-Bus bindings is implemented using a request-and-block technique. While blocking, only the D-Bus socket is polled for new I/O and any D-Bus messages that are not the response to the request are queued for later processing.

This causes several major and inescapable problems:
  • The caller is blocked while waiting for the request to be answered. It (and its user interface, if any) will be completely unresponsive. If the request requires accessing the network, that takes time; if the callee has locked up, the caller will be unresponsive until the call times out.
    Threading is not a solution here because threading is just another way of making your calling asynchronous. Instead you may as well make asynchronous calls where the responses come in via the existing event loop.
  • Messages may be reordered. Any messages received before the watched-for reply will be placed on a queue and delivered to the client after the reply.
    This causes problems in situations where a signal indicating a change of state (i.e., the object has been destroyed) is now received after the method call on that object fails (i.e., with the exception UnknownMethod). In this situation, it is hard to know what error to display to the user. Whereas if we receive a signal first, we can cancel pending D-Bus method calls, or ignore their responses.
  • Two processes making pseudo-blocking calls on each other can deadlock, with each waiting for the other to respond to its query. This scenario can occur with processes that are both a D-Bus service and call other D-Bus services (for example, Telepathy clients). The Channel Dispatcher calls methods on clients to dispatch channels, but clients also call methods on the Channel Dispatcher to request the opening of new channels (or equally they call the Account Manager, which is part of the same process).

Method calls in the first Telepathy bindings, generated in C, simply used typedef callback functions. Your callback function simply had to implement the same type signature.

typedef void (*tp_conn_get_self_handle_reply) (
    DBusGProxy *proxy,
    guint handle,
    GError *error,
    gpointer userdata

This idea is simple, and works for C, so was continued into the next generation of bindings.

In recent years, people have developed a way to use scripting languages such as Javascript and Python, as well as a C#-like language called Vala, that use GLib/GObject-based APIs via a tool called GObject-Introspection. Unfortunately, it's extremely difficult to rebind these types of callbacks into other languages, so newer bindings are designed to take advantage of the asynchronous callback features provided by the languages and GLib.

20.4.2. Object Readiness

In a simple D-Bus API, such as the low-level Telepathy bindings, you can start making method calls or receive signals on a D-Bus object simply by creating a proxy object for it. It's as simple as giving an object path and interface name and getting started.

However, in Telepathy's high-level API, we want our object proxies to know what interface are available, we want common properties for the object type to be retrieved (e.g., the channel type, target, initiator), and we want to determine and track the object's state or status (e.g., the connection status).

Thus, the concept of readiness exists for all proxy objects. By making a method call on a proxy object, you are able to asynchronously retrieve the state for that object and be notified when state is retrieved and the object is ready for use.

Since not all clients implement, or are interested in, all the features of a given object, readiness for an object type is separated into a number of possible features. Each object implements a core feature, which will prepare crucial information about the object (i.e., its Interfaces property and basic state), plus a number of optional features for additional state, which might include extra properties or state-tracking. Specific examples of additional features you can ready on various proxies are contact info, capabilities, geolocation information, chat states (such as "Escher is typing…") and user avatars.

For example, connection object proxies have:

The programmer requests that the object is readied, providing a list of features in which they are interested and a callback to call when all of those features are ready. If all the features are already ready, the callback can be called immediately, else the callback is called once all the information for those features is retrieved.

20.5. Robustness

One of the key advantages of Telepathy is its robustness. The components are modular, so a crash in one component should not bring down the whole system. Here are some of the features that make Telepathy robust:

20.6. Extending Telepathy: Sidecars

Although the Telepathy specification tries to cover a wide range of features exported by communication protocols, some protocols are themselves extensible4. Telepathy's developers wanted to make it possible extend your Telepathy connections to make use of such extensions without having to extend the Telepathy specification itself. This is done through the use of sidecars.

Sidecars are typically implemented by plugins in a Connection Manager. Clients call a method requesting a sidecar that implements a given D-Bus interface. For example, someone's implementation of XEP-0016 privacy lists might implement an interface named com.example.PrivacyLists. The method then returns a D-Bus object provided by the plugin, which should implement that interface (and possibly others). The object exists alongside the main Connection object (hence the name sidecar, like on a motorcycle).

The History of Sidecars

In the early days of Telepathy, the One Laptop Per Child project needed to support custom XMPP extensions (XEPs) to share information between devices. These were added directly to Telepathy-Gabble (the XMPP Connection Manager), and exposed via undocumented interfaces on the Connection object. Eventually, with more developers wanting support for specific XEPs which have no analogue in other communications protocols, it was agreed that a more generic interface for plugins was needed.

20.7. A Brief Look Inside a Connection Manager

Most Connection Managers are written using the C/GLib language binding, and a number of high-level base classes have been developed to make writing a Connection Manager easier. As discussed previously, D-Bus objects are published from software objects that implement a number of software interfaces that map to D-Bus interfaces. Telepathy-GLib provides base objects to implement the Connection Manager, Connection and Channel objects. It also provides an interface to implement a Channel Manager. Channel Managers are factories that can be used by the BaseConnection to instantiate and manage channel objects for publishing on the bus.

The bindings also provide what are known as mixins. These can be added to a class to provide additional functionality, abstract the specification API and provide backwards compatibility for new and deprecated versions of an API through one mechanism. The most commonly used mixin is one that adds the D-Bus properties interface to an object. There are also mixins to implement the ofdT.Connection.Interface.Contacts and ofdT.Channel.Interface.Group interfaces and mixins making it possible to implement the old and new presence interfaces, and old and new text message interfaces via one set of methods.

[Example Connection Manager Architecture]

Figure 20.5: Example Connection Manager Architecture

Using Mixins to Solve API Mistakes

One place where mixins have been used to solve a mistake in the Telepathy specification is the TpPresenceMixin. The original interface exposed by Telepathy (odfT.Connection.Interface.Presence) was incredibly complicated, hard to implement for both Connections and Clients, and exposed functionality that was both nonexistent in most communications protocols, and very rarely used in others. The interface was replaced by a much simpler interface (odfT.Connection.Interface.SimplePresence), which exposed all the functionality that users cared about and had ever actually been implemented in the connection managers.

The presence mixin implements both interfaces on the Connection so that legacy clients continue to work, but only at the functionality level of the simpler interface.

20.8. Lessons Learned

Telepathy is an excellent example of how to build a modular, flexible API on top of D-Bus. It shows how you can develop an extensible, decoupled framework on top of D-Bus. One which requires no central management daemon and allows components to be restartable, without loss of data in any other component. Telepathy also shows how you can use D-Bus efficiently and effectively, minimizing the amount of traffic you transmit on the bus.

Telepathy's development has been iterative, improving its use of D-Bus as time goes on. Mistakes were made, and lessons have been learned. Here are some of the important things we learned in designing the architecture of Telepathy:


  1., or see the developers' manual at
  3. From here on, /org/freedesktop/Telepathy/ and org.freedesktop.Telepathy will be abbreviated to ofdT to save space.
  4. E.g., the Extensible Messaging and Presence Protocol (XMPP).