Java™ Platform
Standard Ed. 6

java.io
Class ByteArrayInputStream

java.lang.Object
  extended by java.io.InputStream
      extended by java.io.ByteArrayInputStream
All Implemented Interfaces:
Closeable

public class ByteArrayInputStream
extends InputStream

A ByteArrayInputStream contains an internal buffer that contains bytes that may be read from the stream. An internal counter keeps track of the next byte to be supplied by the read method.

Closing a ByteArrayInputStream has no effect. The methods in this class can be called after the stream has been closed without generating an IOException.

Since:
JDK1.0
See Also:
StringBufferInputStream

Field Summary
protected  byte[] buf
          An array of bytes that was provided by the creator of the stream.
protected  int count
          The index one greater than the last valid character in the input stream buffer.
protected  int mark
          The currently marked position in the stream.
protected  int pos
          The index of the next character to read from the input stream buffer.
 
Constructor Summary
ByteArrayInputStream(byte[] buf)
          Creates a ByteArrayInputStream so that it uses buf as its buffer array.
ByteArrayInputStream(byte[] buf, int offset, int length)
          Creates ByteArrayInputStream that uses buf as its buffer array.
 
Method Summary
 int available()
          Returns the number of remaining bytes that can be read (or skipped over) from this input stream.
 void close()
          Closing a ByteArrayInputStream has no effect.
 void mark(int readAheadLimit)
          Set the current marked position in the stream.
 boolean markSupported()
          Tests if this InputStream supports mark/reset.
 int read()
          Reads the next byte of data from this input stream.
 int read(byte[] b, int off, int len)
          Reads up to len bytes of data into an array of bytes from this input stream.
 void reset()
          Resets the buffer to the marked position.
 long skip(long n)
          Skips n bytes of input from this input stream.
 
Methods inherited from class java.io.InputStream
read
 
Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait
 

Field Detail

buf

protected byte[] buf
An array of bytes that was provided by the creator of the stream. Elements buf[0] through buf[count-1] are the only bytes that can ever be read from the stream; element buf[pos] is the next byte to be read.


pos

protected int pos
The index of the next character to read from the input stream buffer. This value should always be nonnegative and not larger than the value of count. The next byte to be read from the input stream buffer will be buf[pos].


mark

protected int mark
The currently marked position in the stream. ByteArrayInputStream objects are marked at position zero by default when constructed. They may be marked at another position within the buffer by the mark() method. The current buffer position is set to this point by the reset() method.

If no mark has been set, then the value of mark is the offset passed to the constructor (or 0 if the offset was not supplied).

Since:
JDK1.1

count

protected int count
The index one greater than the last valid character in the input stream buffer. This value should always be nonnegative and not larger than the length of buf. It is one greater than the position of the last byte within buf that can ever be read from the input stream buffer.

Constructor Detail

ByteArrayInputStream

public ByteArrayInputStream(byte[] buf)
Creates a ByteArrayInputStream so that it uses buf as its buffer array. The buffer array is not copied. The initial value of pos is 0 and the initial value of count is the length of buf.

Parameters:
buf - the input buffer.

ByteArrayInputStream

public ByteArrayInputStream(byte[] buf,
                            int offset,
                            int length)
Creates ByteArrayInputStream that uses buf as its buffer array. The initial value of pos is offset and the initial value of count is the minimum of offset+length and buf.length. The buffer array is not copied. The buffer's mark is set to the specified offset.

Parameters:
buf - the input buffer.
offset - the offset in the buffer of the first byte to read.
length - the maximum number of bytes to read from the buffer.
Method Detail

read

public int read()
Reads the next byte of data from this input stream. The value byte is returned as an int in the range 0 to 255. If no byte is available because the end of the stream has been reached, the value -1 is returned.

This read method cannot block.

Specified by:
read in class InputStream
Returns:
the next byte of data, or -1 if the end of the stream has been reached.

read

public int read(byte[] b,
                int off,
                int len)
Reads up to len bytes of data into an array of bytes from this input stream. If pos equals count, then -1 is returned to indicate end of file. Otherwise, the number k of bytes read is equal to the smaller of len and count-pos. If k is positive, then bytes buf[pos] through buf[pos+k-1] are copied into b[off] through b[off+k-1] in the manner performed by System.arraycopy. The value k is added into pos and k is returned.

This read method cannot block.

Overrides:
read in class InputStream
Parameters:
b - the buffer into which the data is read.
off - the start offset in the destination array b
len - the maximum number of bytes read.
Returns:
the total number of bytes read into the buffer, or -1 if there is no more data because the end of the stream has been reached.
Throws:
NullPointerException - If b is null.
IndexOutOfBoundsException - If off is negative, len is negative, or len is greater than b.length - off
See Also:
InputStream.read()

skip

public long skip(long n)
Skips n bytes of input from this input stream. Fewer bytes might be skipped if the end of the input stream is reached. The actual number k of bytes to be skipped is equal to the smaller of n and count-pos. The value k is added into pos and k is returned.

Overrides:
skip in class InputStream
Parameters:
n - the number of bytes to be skipped.
Returns:
the actual number of bytes skipped.

available

public int available()
Returns the number of remaining bytes that can be read (or skipped over) from this input stream.

The value returned is count - pos, which is the number of bytes remaining to be read from the input buffer.

Overrides:
available in class InputStream
Returns:
the number of remaining bytes that can be read (or skipped over) from this input stream without blocking.

markSupported

public boolean markSupported()
Tests if this InputStream supports mark/reset. The markSupported method of ByteArrayInputStream always returns true.

Overrides:
markSupported in class InputStream
Returns:
true if this stream instance supports the mark and reset methods; false otherwise.
Since:
JDK1.1
See Also:
InputStream.mark(int), InputStream.reset()

mark

public void mark(int readAheadLimit)
Set the current marked position in the stream. ByteArrayInputStream objects are marked at position zero by default when constructed. They may be marked at another position within the buffer by this method.

If no mark has been set, then the value of the mark is the offset passed to the constructor (or 0 if the offset was not supplied).

Note: The readAheadLimit for this class has no meaning.

Overrides:
mark in class InputStream
Parameters:
readAheadLimit - the maximum limit of bytes that can be read before the mark position becomes invalid.
Since:
JDK1.1
See Also:
InputStream.reset()

reset

public void reset()
Resets the buffer to the marked position. The marked position is 0 unless another position was marked or an offset was specified in the constructor.

Overrides:
reset in class InputStream
See Also:
InputStream.mark(int), IOException

close

public void close()
           throws IOException
Closing a ByteArrayInputStream has no effect. The methods in this class can be called after the stream has been closed without generating an IOException.

Specified by:
close in interface Closeable
Overrides:
close in class InputStream
Throws:
IOException - if an I/O error occurs.

Java™ Platform
Standard Ed. 6

Submit a bug or feature
For further API reference and developer documentation, see Java SE Developer Documentation. That documentation contains more detailed, developer-targeted descriptions, with conceptual overviews, definitions of terms, workarounds, and working code examples.

Copyright 2006 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. Also see the documentation redistribution policy.